Yachts-Trader.com

New Listing

1966 L. Bezier, France Eugéne Cornu Bermudan Ketch

hampshire

£35,000 ex. VAT

Engine

-

Total Power

-

Engine Hours

NA

Class

Sail Classic

Length

14.7m (48.23ft)

Year

1966

Model

Eugéne Cornu Bermudan Ketch

Boat Details

Description

Wooden Ships Comments on this Eugéne Cornu Bermudan Ketch

Designed by Eugéne Cornu ad built by L. Bezier Yachts, France in 1966.

Bought by the previous owner in 2004, she had been operating as a successful charter vessel in Turkey for 15 years.  The owner was drawn to the interior layout which is separated into 3 very distinct areas, allowing for 6 guests to cruise together in comfort without being ‘on top’ of one another.  Her easily handled ketch rig gives plenty of sail plan options which is great when sailing short handed but also drives her on well giving her very acceptable performance for some of the classic regatta racing that she has taken part in.  The boat was cruised around the Med until 2011 when she returned to the UK, being based here on the south coast with local cruising and some classic regatta racing.

Sold by Wooden Ships in the winter of 2025 to a buyer with a plan to carry out a major refit to prepare the boat for global cruising.  That work was started by Jeremy Rogers Ltd, Lymington, however the owner decided to stop the project and walked away from the boat.  Sadly this has left the yacht in need of a new owner to continue the work and get her back afloat.  The work done to date has uncovered all the issues, therefore we now know exactly what is required to complete the refit and this work can be fairly accurately quantified for a buyer.  Quotes from Jeremy Rogers for the completion of the refit available on request.

The boat has a fairly recent teak deck, recent main mast and rigging plus a good engine.  Below is a list of work done in the last year and we can provide a list of the jobs required to complete the project along with associated costs.

A very fine and attractive yacht that will make a satisfying project for the right owner.

 

Length on Deck                      48’3” / 14.7m

Length  Waterline                  32’2” / 9.8m

Beam                                       11’4” / 3.45

Draft                                         6’6” / 2m

https://youtu.be/u0hS32riNZ8

Construction

Hull

Carvel planked in iroko all copper rivet fastened to steam bent oak timbers.

Heavy grown oak floors across the centreline, seemingly right the way through the hull with keel bolts passing through them.

External iron ballast keel fastened with ferrous bolts, possibly black iron which is a very durable material.  2 bolts drawn this year and found in satisfactory condition.  The yard say there is no reason to drop the ballast keel off the hull.

 

Decks and Cockpit

New deck laid by Jeremy Rogers of Lymington in 2018.

Yacht laid teak deck epoxy glued to a marine plywood subdeck with payed seams.

Deck laid on mahogany deck beams and beam shelf.

Varnished iroko covering boards and toe rails with bronze fairleads and large bronze bollard cleats.

The cockpit has been completely removed as large areas of the plywood and supporting frame were in a poor state.  There remains to main deck beams in way of the bridge deck but the cockpit will need replacing entirely.

 

Superstructure

Coachroof with varnished mahogany coamings and rebated portlights.

Sheathed plywood coachoof deck on mahogany deck beams.

Brand new skylights and forehatch made from Honduras mahogany all ready to be fitted.

Forehatch and aft lazarette in varnished mahogany.

Rig

Spars

Bermudan ketch rig on keel stepped varnished masts.

The hollow section main mast was new from Collars in 2015 made from spruce.

Varnished wooden slab reefing booms.

 

Standing and Running Rigging

Stainless steel standing rigging new in 2015 to internal stainless chain plates.

 

Harken MKIV 2 roller furling headsail system.

 

Halyards run down to the mast base and reefing lines to the gooseneck.  Clutches on the mast to hold the falls.

 

Sails

Mainsail from Doyle Sails in good condition, 2010

Mizzen from Doyle Sails in fair condition, 2010

Genoa from Doyle Sails in good condition, 2010

Cruising chute from Doyle Sails in excellent condition, 2010

Spinnaker in excellent condition

 

Winches

2 x Andersen 52ST Two Speed cockpit sheet winches.

1 x Andersen 40St Two Speed main mast winch.

1 x Andersen 28ST Two Speed mizzen mast winch.

Machinery

Engine

Nanni N4.65 59hp 4cyl turbo charged diesel engine installed new in 2012.  Engine is still in place on its beds, shaft has been removed.

Single lever controls to a centreline fixed 3 blade bronze propeller gives 6 knots cruising speed.  9 knots max speed.

Domestic hot water calorifier tank connected to the engine.

 

Tanks

Stainless steel fuel tank fits under the cockpit sole, new in 2022.  Tank removed from the boat currently

Large stainless steel water tanks under the saloon cabin sole.  These are still in place.

 

Batteries and Electrics

1 x 12 volt battery for engine starting.

2 x Varta 230ah domestic batteries.  All batteries are with the boat but will likely need replacing during the pending refit.

Charging from engine alternator or through the ProMariner ProNautic 12 volt 30amp battery charger when on shore power.

Much of the wiring has been removed from the boat and she will need a complete re-wire.

Accommodation

Berths and Headroom

7 berths including 2 doubles and 3 singles.

Headroom throughout the boat of approximately 6’3” (1.9m)

Bunk lengths of approximately 6’2”

 

General Description

Much of the interior is still in place and has been largely untouched during the work so far.  The interior of this yacht is rather unique being split into 3 distinct and dividable areas.

The interior joinery appears to be all original in panelled varnished mahogany.

Steps down from the companion hatch over the engine box into the aft cabin which has a large single quarter berth either side.

Chart desk in the forward port corner faces outboard under the side deck.

Panelled mahogany doors with original bronze fittings close to separate off the main saloon.

Main saloon has a large double berth come settee on the port side with a single settee berth to starboard and a central dropleaf mahogany table.  Skylight above.

Starboard side passageway moving forward with the heads compartment to port and a hanging locker/storage space to starboard under the side deck.

Into the galley and forecabin where the galley is arranged along to starboard side and to port is a good size double berth.  The main mast comes through the deck in the middle of this cabin.

Mahogany door leads to the forepeak where there is a second sea toilet and a large storage area for warps, fenders etc.

 

Galley

3 burner gas cooker with oven and grill set on gimbals.  Worktop with a single stainless sink and hot and cold pressurised water.  Front loading 12 volt fridge under the work top.

 

Heads

Heads compartment has a Jabsco manual sea toilet that discharges directly overboard.  Hand basin with hot and cold pressurised water.

Hand basin tap pulls out to form a shower over a grating in the sole with a stainless steel tray that drains into a sump tank.

Second Jabsco manual sea toilet fitted in the forepeak discharges directly over board.

Equipment

Steering compass

Raymarine ST60 sounder, log and wind

Raymarine autopilot

Garmin GPS 152

ICOM IC-M421 DSC VHF

 

Lifebuoy

Manual bilge pump

Auto electric bilge pump

 

CQR anchor with 40m x 10mm galvanised chain (2024)

12 volt Simpson Lawrence anchor windlass

Mooring warps

Fenders

 

Bunk and berth cushions

Galley gas cooker

12 volt fridge

2 x Jabsco manual sea toilets

 

1 x 12 volt battery for engine starting

2 x Varta 230ah domestic batteries

ProMarine Pro Nautic 12.30 battery charger

Nanni N4.65 diesel engine

 

Mainsail from Doyle Sails in good condition, 2010

Mizzen from Doyle Sails in fair condition, 2010

Genoa from Doyle Sails in good condition, 2010

Cruising chute from Doyle Sails in excellent condition, 2010

Spinnaker in excellent condition

Mizzen and main sail covers

2 x Andersen 52ST Two Speed cockpit sheet winches

1 x Andersen 40St Two Speed main mast winch

1 x Andersen 28ST Two Speed mizzen mast winch

Harken MKIV 2 roller furling system

 

Cockpit cushions

Ensign and staff

Spray hood

Boat hook

Boat Summary

Make:

L. Bezier, France

Model:

Eugéne Cornu Bermudan Ketch

Boat Type:

sail

Boat Class:

Sail Classic

Build Year:

1966

Refit Year:

-

Hull Number:

-

Deck Plans:

Propulsion

Engine

Make:

-

Model:

-

No. engines:

-

Year:

-

Hours:

-

 

Type:

inboard

Fuel:

diesel

Propeller Material:

-

Total Power:

-

Specification

Dimensions

Length (Overall):

14.7m (48.23ft)

Length (Waterline):

-

Beam:

3.5m (11.48ft)

Min Draft:

-

Max Draft:

2m (6.56ft)

Min Bridge Clearance:

-

Weigths

Gross Weight:

-

Displacement:

-

Tanks

Fresh Water Tanks:

-

Fuel Tanks:

-

Holding Tanks:

-

Speed & Distance

Max Speed:

-

Cruising Speed:

-

Range at cruising speed:

-

 

 

Miscellaneous

Windlass:

-

Deadrise at transom:

-

Hull Material:

wood

Life Raft Capacity:

-

 

 

Accomodation

Berths:

-

Cabins:

-

Toilets:

-

Wooden Ships

Verified Broker

2 months

Active Listings

95

Sold Listings

0

More from Wooden Ships

Ready To Sell Your Boat?

Reach more buyers by listing your boat on Yachts-Trader. Built for Brokers and private sellers, our platform makes selling simple, fast and hassle-free.

Copyright ©2026 Yachts Trader | All rights reserved | Website by: Lazerstation.com